What's your EMR — and what will one claim cost you?
Estimate your experience mod and see what one injury really costs over three years.
Quick answer
An experience modification rate (EMR) compares your workers' comp losses with what's expected for a business of your size and trade. 1.0 is average; 0.85 means a 15% premium discount and 1.25 a 25% surcharge. Many general contractors and owners won't let a sub bid with an EMR above 1.0, and a single claim affects your premium for three policy years.
- Average EMR
- 1.00
- Common bid cutoff
- ≤ 1.00
- Years in the calculation
- 3 completed policy years
- Medical-only claims counted at
- 30% (ERA states)
1Your business
2Claims in the last 3 years
Estimated experience mod
0.90
Better than average — a real bidding advantage.
Discount vs. average, per year
$9,383
≈ $28,148 over the 3 years these claims stay in your mod
What one more claim would do
A single $25K injury would cost you about $34,777 in extra premium.
That's on top of the claim itself — spread over three years of higher workers' comp bills, and it pushes you over the 1.0 line many GCs use to screen bidders.See how your mod was built + a plan to lower it
Free. Unlocks every Insoryx calculator.
How to use the emr calculator
- 1
Pick your trade and state
Your class code sets the expected loss rate the formula compares you against.
- 2
Enter payroll and claims
Use your average annual payroll and every claim in the last three completed policy years. Mark medical-only claims — most states count only 30% of them.
- 3
Read your estimated mod
See where you land against the 1.0 bid threshold, and how much more or less you pay than an average employer.
- 4
Model one more claim
The chart shows how a single new claim of $5K–$250K would move your mod and your premium for three years.
Key numbers
| Average EMR | 1.00 |
|---|---|
| Common bid cutoff | ≤ 1.00 |
| Years in the calculation | 3 completed policy years |
| Medical-only claims counted at | 30% (ERA states) |
| NCCI split point | State-specific, about $9,500–$38,000 |
Questions people ask
Straight answers. Your broker or carrier has the final word on your policy.
How is EMR calculated?
The NCCI formula compares actual losses with expected losses over three completed policy years. Each claim is split into a primary part (up to the split point) that counts fully, and an excess part that is weighted down. Ballast and weighting values, based on your size, stop one claim from swinging a small employer's mod too far.
What is a good EMR in construction?
Below 1.0 is better than average; 0.80–0.90 is strong. Many GCs, owners and public projects require 1.0 or lower to prequalify, and some require 0.90 or lower.
How long does a claim affect my EMR?
Three years. Each policy year stays in the experience period for three rating cycles, so one claim raises your premium three years in a row.
How can I lower my EMR?
Report claims fast, use return-to-work programs to keep claims medical-only, check your loss runs for errors and closed reserves, and make sure your payroll is classified correctly. Frequent small claims hurt more than one large one because primary losses count in full.
Is this my official experience mod?
No. Your official mod comes from NCCI or your state's rating bureau worksheet. This calculator uses a published-formula approximation so you can see the direction and size of the impact.
Methodology
Estimates use published rating methods and typical market ranges by trade and state, reviewed November 2026. They are educational, not a quote or your official rating — actual premiums depend on underwriting, carrier and loss history.More free tools
Keep going
Workers' Comp Audit Estimator
Find out before the auditor does: will you owe money or get a refund?
Open toolUninsured Subcontractor Cost Calculator
What subs without a certificate of insurance will add to your GL and workers' comp audit.
Open toolContract Insurance Cost Calculator
What a contract's insurance requirements add to your bid, line by line.
Open tool